Custom Powder Coat Painting
We have the ability to powder coat paint virtually any metal
part.  The powder coat system includes the following features:

  • The conveyor is capable of handling loads of 400
    pounds per hook with a maximum part envelope of 5 feet
    wide by 5 feet high by 8 feet long; one of the largest in
    the state of Wisconsin.

  • The ten-stage, all stainless steel construction, surface
    pretreatment system, features an acid deoxidizing stage,
    for the treatment of welded, and laser-cut parts.  
    Products fabricated using these processes cause a thick
    heat scale and iron oxide to form on and around the cut
    edges.  This stage eliminates the need for wire brushing
    or grinding to assure proper paint adhesion.

  • A reverse osmosis system produces demineralized water,
    which is used in all stages and multiple rinses have been
    implemented to maximize usage from the cleaners,
    further reducing the amount of discharge to our waste
    treatment and results in an economical and
    environmentally friendly system.

  • Paint application is accomplished through the utilization
    of dual interchangeable ITW Gema "state-of-the-art"
    Vortech booths using ten powder guns.  ITW Gema is the
    "World Leader in Powder Coating Systems".  The
    Vortech powder coating booths are designed to minimize
    the time required for color changes which results in a
    highly flexible system to meet your needs at a competitive
    price.

  • The powder collection unit features high efficiency
    cartridge filters which recycle 96% of the over-spray,
    maximizing the yield of the powders and minimizing waste.
Phone: 262-363-0615                        Fax: 262-363-0613           PO Box 180441 Delafield, WI  53018
                                 Tearney & Associates, LLC